top of page

Masterclass SPA-4 Stereo Power Amplifier & MPA-4 Balanced Mono Power Amplifier

The popularity of the Masterclass series has resulted in over seventeen years of continuous production. Offering an excellent price/performance ratio it is easy to see why it remains so successful. With an abundance of headroom, the MPA-4 mono power amplifiers deal easily with heavy complex music, allowing the low level detail to be heard clearly and accurately. Boasting a fully balanced circuit design, it can be the engine room of a fully balanced hi fi system.

 

The SPA-4 is a stereo version of the MPA-4 and uses the same class A circuit. The only differences are power output and the additional flexibility of both single ended and balanced inputs. Not every music lover can accommodate two substantial power amplifiers in their listen space, so a single SPA-4 could be the solution. One of the noticeable abilities of the SPA-4 is how well it works with smaller loudspeaker designs as well as large ones. Control and soundstage are two key elements of the SPA-4 making it a fine power amplifier.

 

Please reload

SPA4 No Handles LR.jpg
SPA-4 Power Amplifier Back Panel

SPA-4

Facilities

Inputs ​                                    Stereo line level, stereo balanced

Outputs                                  Stereo pair multi-way locking binding posts

 

Specifications

Input Sensitivity                      1Volt for full output

Power Output                         75 Watts into 4 Ohms both channels working

Frequency Response             +/-0dB 15Hz-30kHz

Bandwidth                             -3dB points 2Hz-200kHz

Signal to Noise                       >85dB

Gross Weight  (packed)         25kgs

Dimensions                           250 x 430 x 350mm (hwd)

 

               

J E Sugden & Co Ltd, Heckmondwike, West Yorkshire. www.sugdenaudio.com

The manufacturer reserves the right to change specifications without notice.

 

MPA-4 Balance Power Amplifiers Back Panel

MPA-4

Facilities

Inputs ​                                    Mono balanced

Outputs                                  Single pair multi-way locking binding posts

 

Specifications

Input Sensitivity                      1Volt for full output

Power output                         165 Watts into 8 Ohms both channels working

Frequency response             +/-0dB 15Hz-30kHz

Bandwidth                              -3dB points 2Hz-200kHz

Signal to noise                       >85dB

Gross weight  (packed)         25kgs x 2

Dimensions                           250 x 430 x 360mm (hwd)

 

               

J E Sugden & Co Ltd, Heckmondwike, West Yorkshire. www.sugdenaudio.com

The manufacturer reserves the right to change specifications without notice.

 

 

bottom of page